[Create an engraving machine] How to prevent and deal with the leakage of the engraving machine's sheet metal

The sheet metal of the engraving machine accounts for a large part of the main body of the equipment. Some engraving machine manufacturers occasionally leak the sheet metal. What is the reason? In fact, it is very easy to solve this problem. The main reason is to pay attention to the following points to create an engraving machine when assembling sheet metal, which can basically prevent water leakage:

1. Precautions for assembling the sheet metal of the engraving machine.

When the sheet metal is assembled into a complete machine shell, it is necessary to pay attention to whether the process is reasonable to create an engraving machine. In particular, the assembly sequence should be paid attention to. The assembly should be strictly in accordance with the assembly flow chart, which will not lead to the situation that this component is installed but that component cannot be installed.

2. Connection of water pump, air pump and oil pump

Holes shall be drilled on the sheet metal below the back of the engraving machine to fix the water pump, air pump and oil pump. The pipes connected during installation are different. Light green small pipes are used for oil drainage, black pipes for air drainage, and white pipes for water drainage. The installation flow chart shows the creation of an engraving machine.

3. Connection of worktable base

The metal plate of the engraving machine is located on the side where the base of the engraving machine worktable is created. The engraving machine is created. There are four holes to fix the base of the worktable. Special attention should be paid to this place. First, glue around the holes, then connect the metal plate and the base, and then tighten the screws. If the glue is not properly applied, it will cause water ingress to the equipment, affect the normal operation of the equipment, and be very unfavorable to the maintenance of the equipment.

Do the above three points well, and there will be no water leakage. It is recommended to choose a medium and large scale manufacturer when buying a precision engraving machine. The technology and service are in place to create a precision engraving machine.