[German Woodworking Sculpture Machine] What is the cause of the high temperature of the engraving machine head and the hot hand

During the use of the engraving machine, the machine head is found to be hot. The German woodworking engraving machine manufacturer found that the reasons are as follows:

1. The power current of the German woodworking engraving machine is set too high. The corresponding solution is to install a voltage regulator on the German woodworking engraving machine;

2. Test the temperature of the indoor German woodworking engraving machine. If the temperature is too high, it may also cause the spindle temperature to be too high. In case of this German woodworking engraving machine type, install more fans to dissipate heat and reduce the spindle temperature.

3. German woodworking carving machine has been working for a long time without rest. The corresponding solution is that the German woodworking engraving machine can work continuously for up to 10 hours a day, and the machine should rest for 30 minutes every 3 hours or more, which can extend the service life of the machine;

4. The water circulation system of the water tank is not smooth and needs to be cleaned;